Doping stability and opto-electronic performance of chemical vapour deposited graphene on transparent flexible substrates

The primary barrier to wider commercial adoption of graphene lies in reducing the sheet resistance of the transferred material without compromising its high broad-band optical transparency, ideally through the use of novel transfer techniques and doping strategies. Here, chemical vapour deposited graphene was uniformly transferred to polymer supports by thermal and UV approaches and the time-dependent evolution of the opto-electronic performance was assessed following exposure to three kinds of common graphene dopants. Doping with FeCl3 and SnCl2 showed minor, and notably time unstable, enhancement in the σopt/σdc figure of merit, whilst AuCl3-doping markedly reduced the sheet resistance by 91.5% to 0.29 kΩ/sq for thermally transferred samples and by 34.4% to 0.62 kΩ/sq for UVtransferred samples offering a means to fabricating viable transparent flexible conductors that near the indium tin oxide benchmarkM. T. Cole thanks the Winston Churchill Trust and the International Young Scientist Research Fellowship, National Natural Science Foundation of China, for generous financial support.This is the author accepted manuscript. The final version is available at http://digital-library.theiet.org/content/journals/10.1049/iet-cds.2014.0074

Perceptions of school-based alcohol education by educational and health stakeholders: “Education as usual” compared to a randomised controlled trial

The present study sought the views of stakeholders, including school leaders and statutory stakeholders, on the content and evaluation of a classroom-based alcohol education intervention in a Randomised Controlled Trial in Scotland and Northern Ireland. Purposive sampling was used to ensure that schools from both the Intervention and Control groups were equally represented, and to ensure that similar numbers and grades of stakeholders in both countries were represented. A total of 27 participants (Male = 13 (48%); Female = 14 (52%)) engaged in a semi-structured interview prior to the end of the trial. Results suggest that: schools generally design their own alcohol education programmes; that intervention schools thought highly of the particular intervention tested; and that both groups engaged meaningfully in the research. The threshold for acceptance of the intervention was lower than the successful outcome of the trial. More pragmatic considerations were considered equally important. From the point of view of the statutory stakeholders, funding of an intervention depends on a successful outcome evaluation, but that “success” may mean a positive impact on at-risk groups, and not necessarily at a universal level. School-based participants also focussed on ease of delivery and user friendliness as key determinants of programme utilisation

Large-area uniform graphene-like thin films grown by chemical vapor deposition directly on silicon nitride

Large-area uniform carbon films with graphene-like properties are synthesized by chemical vapor deposition directly on Si3N4/Si at 1000 degrees C without metal catalysts. The as deposited films are atomically thin and wrinkle- and pinhole-free. The film thickness can be controlled by modifying the growth conditions. Raman spectroscopy confirms the sp(2) graphitic structures. The films show ohmic behavior with a sheet resistance of similar to 2.3-10.5 k Omega/square at room temperature. An electric field effect of similar to 2-10% (V-G=-20 V) is observed. The growth is explained by the self-assembly of carbon clusters from hydrocarbon pyrolysis. The scalable and transfer-free technique favors the application of graphene as transparent electrodes

Ultra-broadband Polarisers Based on Metastable Free-Standing Aligned Carbon Nanotube Membranes

A carbon nanotube free-standing linearly dichroic polariser is developed using solid-state extrusion. Membrane cohesion is experimentally and numerically demonstrated to derive from inter-tube van der Waals interactions in this family of planar metastable morphologies, controlled by the chemical vapour deposition conditions. Ultra-broadband polarisation (400 nm – 2.5 mm) is shown and corroborated by effective medium and full numerical simulations.This work was supported by the Isaac Newton Trust, Trinity College Cambridge University. M. T. Cole thanks the Winston Churchill Memorial Trust and the Oppenheimer Research Fellowship, Cambridge University, for generous financial support.This is the author accepted manuscript. The final version is available from Wiley at http://onlinelibrary.wiley.com/doi/10.1002/adom.201400238/abstract

Worse Physical Disability Is Associated With the Expression of PD-1 on Inflammatory T-Cells in Multiple Sclerosis Patients With Older Appearing Brains

Background: Magnetic Resonance Imaging (MRI) analysis method “brain-age” paradigm could offer an intuitive prognostic metric (brain-predicted age difference: brain-PAD) for disability in Multiple Sclerosis (MS), reflecting structural brain health adjusted for aging. Equally, cellular senescence has been reported in MS using T-cell biomarker CD8+CD57+. Objective: Here we explored links between MRI-derived brain-age and blood-derived cellular senescence. We examined the value of combining brain-PAD with CD8+CD57+(ILT2+PD-1+) T-cells when predicting disability score in MS and considered whether age-related biological mechanisms drive disability. Methods: Brain-age analysis was applied to T1-weighted MRI images. Disability was assessed and peripheral blood was examined for CD8+CD57+ T-cell phenotypes. Linear regression models were used, adjusted for sex, age and normalized brain volume. Results: We included 179 mainly relapsing-remitting MS patients. A high brain-PAD was associated with high physical disability (mean brain-PAD = +6.54 [5.12–7.95]). CD8+CD57+(ILT2+PD-1+) T-cell frequency was neither associated with disability nor with brain-PAD. Physical disability was predicted by the interaction between brain-PAD and CD8+CD57+ILT2+PD-1+ T-cell frequency (AR2 = 0.196), yet without improvement compared to brain-PAD alone (AR2 = 0.206; AICc = 1.8). Conclusion: Higher frequency of CD8+CD57+ILT2+PD-1+ T-cells in the peripheral blood in patients with an older appearing brain was associated with worse disability scores, suggesting a role of these cells in the development of disability in MS patients with poorer brain health

Contesting an international trade agreement

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this recordWe develop a new theoretical framework of trade agreement (TA) formation, called a ‘parallel contest’, that emphasizes the political fight over TA ratification within countries. TA ratification is inherently uncertain in each country, where anti- and pro-trade interest groups contest each other to influence their own governments’ ratification decision. Unlike prior literature, the protection embodied in negotiated TA tariffs reflects a balance between the liberalizing force of lobbying and inherently protectionist government preferences. Moreover, new international political externalities emerge that are not internalized by governments that just internalize terms of trade externalities

Theoretical Research on a Multibeam-Modulated Electron Gun Based on Carbon Nanotube Cold Cathodes

Multi-beam modulation in a carbon nanotube (CNT) cold cathode electron gun is herein investigated in order to develop miniaturized and fully integrated vacuum electron devices. By exposing the electron source to a millimeter-wave signal, the steady-state field emission current density is efficiently modulated by the incident high-frequency (HF) electric field. Our simulation results of this multi-beam electron gun show that the field emission current density can be efficiently modulated by different incident frequency millimeter waves. We find that the modulation depth is increased by enhancing the HF input power and anode operation voltage. The modulation frequency and phase of each electron beam can be controlled using a single millimeter-wave source and by simply adjusting the lateral distance between adjacent CNT cold cathodes.This work was supported in part by the National Basic Research Program of China under Grant 2013CB933603 and in part by the National Natural Science Foundation of China under Grant U1134006 and Grant 6110104.This is the author accepted manuscript. The final version is available from IEEE via http://dx.doi.org/10.1109/TED.2016.256558

Carbon nanotube - Based cold cathodes: Field emission angular properties and temporal stability

The field emission (FE) properties of carbon nanotube (CNT)-based cathodes have been investigated on nanostructured surfaces grown by plasma enhanced chemical vapor deposition. The FE angular properties and temporal stability of the emergent electron beam have been determined using a dedicated apparatus for cathodes of various architectures and geometries, characterized by scanning electron microscopy and I-V measurements. The angular electron beam divergence and time instability at the extraction stage, which are crucial parameters in order to obtain high brilliance of FE-based-cathode electron sources, have been measured for electrons emitted by several regular architectures of vertically aligned arrays and critically compared to conventional disordered cathodes. The measured divergences strongly depend on the grid mesh. For regular arrays of individual CNT, divergences from 2° to 5° have been obtained; in this specific case, measurements together with ray-tracing simulations suggest that the maximum emission angle is of the order of ±30° about the tube main axis. Larger divergences have been measured for electron beams emitted from honeycomb-structured cathodes (6°) and significantly broader angle distributions (10°) from disordered CNT surfaces. Emission current instabilities of the order of 1% for temporal stability studies conducted across a medium time scale (hours) have been noted for all cathodes consisting of a high number (10$^{4}$ and larger) of aligned CNTs, with the degree of stability being largely independent of the architecture.The European AXIS project (FP7-SME-1-2007) is acknowledged for financial support

Conjugated polyelectrolyte nano field emission adlayers.

Here we report on a straightforward and rapid means of enhancing the field electron emission performance of nascent vertically aligned multi-walled carbon nanotubes by introducing a polar zwitterionic conjugated polyelectrolyte adlayer at the vacuum-emitter interface. We attribute the observed 66% decrease in turn-on electric field to the augmented emitter micro-morphology and shifted surface band structure. The composite emitters can be optically modulated by exploiting the absorption cross-section of the solution cast adlayer, which increases the local carrier concentration which broadens the effective electrostatic shape of the emitter during optical excitation. Assessment via scanning anode field emission microscopy reveals a 25% improvement in DC time stability, a significant reduction in long-term hysteresis shift, and a threefold increase in bandwidth during pulsed mode operation.Oppenheimer TrustThis is the final version of the article. It first appeared from the Royal Society of Chemistry via http://dx.doi.org/10.1039/c6nh00071

Bulk molybdenum field emitters by inductively coupled plasma etching.

In this work we report on the fabrication of inductively coupled plasma (ICP) etched, diode-type, bulk molybdenum field emitter arrays. Emitter etching conditions as a function of etch mask geometry and process conditions were systematically investigated. For optimized uniformity, aspect ratios of >10 were achieved, with 25.5 nm-radius tips realised for masks consisting of aperture arrays some 4.45 μm in diameter and whose field electron emission performance has been herein assessed